Taurino Power

IMPORTANT NOTE:
This is not a CLONE of Arduino, this is a improved version of 
the Arduino Mega2560R3, made for the 3D printer community, 
Taurino Project is open source and the files are available on github
and under www.taurino.cc

 With Taurino Power by Reprapdiscount don't need worry any more if you want to use more than 12v, the Taurino Power can handle voltage up to 35v

 TECH SPECS:

TAURINO - POWER 
=============== 

* COMPATIBILITY: 
- Arduino 2560-R3 compatible (easy to change/flash firmware for end user) 
- ATmega16U2 (with enhanced firmware) for high speed USB serial connection (up to 2MBit) 
- all RepRap RAMPS versions can be used 

* UNIVERSAL POWER: 
- can be used with 12V-35V 
(e.g. RAMPS board with 24V can supply voltage (via D1) to TAURINO for standalone operation 
- no damage of ATmega2560 possible due to to high power supply (e.g. from RAMPS or external connector) 
- integrated high precision power regulator for 5V (ATmega2560/Logic)

You will get:

- 1x Taurino Power

Note: Please download the drivers from: 
http://taurinopower.reprapdiscount.com
If you have questions or need support please post your request in our support forums, thank you!